J55 Clutch-operated Screw Press
The maximum energy can be output just by dropping 12.5% of the
flywheel speed and the forming speed can be keep stably at 0.5m/s
Using the VFD, the deforming speed can be adjustable between
0.25m/s to 0.6m/s, which is suitable for alloy forgings.
Using hydraulic clutch control can realize the heavy and light
striking and continuous striking, and the striking energy can be
loaded at any point of the stroke.
High deforming energy, twice compared with other screw presses with
the same specification.
Using duplex guides of cylindrical guide and the X shape guide,
assure eccentric load and suitable for multi-station forging
Long slider stroke without fixed bottom dead point, it is
convenient to adjust dies, which will improve the product
efficiency and the die lifetime.
Using hydraulic cylinder for return stroke, the flywheel does not
need to revolve reversely, so the flywheel energy loss and
installed power are small. It is energy-efficient.
Striking energy, striking stroke, multi-station forging can be
preset by PLC. And it can display fault information automatically.
It is suitable for continuous product lines for moderate and mass
production, and can realize high precision, high efficiency, energy
saving and material saving.
Foreign Trade Manager
China Forging Machinery Co.,Ltd.
No.88 Shanghu Road, Chengdong Town, Haian, Nantong, Jiangsu
Province, P.R.China (226600)
Tel.: 0086-513-8836 8808 Fax.:0086-513-8836 9186
Mob:0086-159 9659 3080